Epoxy Flooring Indiana
100% solids epoxy systems professionally installed across Carmel, Fishers, and greater Indianapolis. Three times harder than concrete. Lifetime warranty.
Your Floor, Your Color
Every color flake blend in our system is hand-broadcast at full saturation — no thin or sparse coverage. The flakes are sealed under our polyurea topcoat so they never wear off or fade.
Before
After
What Is 100% Solids Epoxy?
Epoxy flooring is a multi-layer resin system that chemically bonds to concrete — not sits on top of it. Unlike paint, properly installed epoxy penetrates and locks into the pores of the slab, creating a surface three times harder than bare concrete and virtually impervious to staining, chemicals, and abrasion.
We use exclusively 100% solids formulas. Every molecule in the can ends up on your floor. The result is a thicker, denser, more durable coating than any hardware store kit can offer.
Layer-by-Layer Installation
- Diamond Grinding: Opens the concrete pores for maximum chemical adhesion
- Moisture Vapor Primer: Seals the slab against vapor transmission — the #1 cause of failure in Indiana
- 100% Solids Base Coat: Applied at precise mil thickness for structural integrity
- Decorative Broadcast: Vinyl flake hand-broadcast at full coverage into wet base
- Polyurea Topcoat: Gloss-perfect, chemical-resistant, UV-stable seal coat
Why DIY Kits Fail in Indiana
Hardware store kits are 40–50% solids water-based products. Without diamond grinding they rely on surface adhesion alone. In Indiana's freeze-thaw climate that bond fails within 1–3 years. Our system over a properly prepared slab will outlast any DIY product by a decade or more.
It Starts With Diamond Grinding
Every successful epoxy installation starts the same way — mechanical diamond grinding that opens the pores of the concrete for true chemical adhesion. Skip this step (as most DIY kits do) and the coating will fail within 1-3 years, no matter how good the product is.
Our dust-extraction equipment keeps the job site clean while the grinder profiles the slab to the correct CSP (Concrete Surface Profile) for your chosen coating system.
What Indiana Homeowners Say
"We had three quotes. These guys weren't the cheapest — but after seeing our neighbor's Carmel garage, the decision was obvious. Our floor looks like a showroom. Worth every cent."
"Professional, punctual, meticulous. Polyaspartic floor was walk-ready the next morning. My Fishers neighbors won't stop asking who did it."
"Had the garage done before listing. Our realtor called it the biggest value-add. We got $15K over asking. Hire them ten times over."
"Two years later and our auto shop floor still looks like day one — no peeling, no staining. They finished ahead of schedule."
"I've had epoxy floors peel elsewhere in two years. These guys explained exactly why that happens. Two years in, our floor looks like day one."
"We went with the metallic finish. It looks like something from an architectural magazine. Everyone who walks into our garage stops and stares."
Questions Answered
Ready to Transform Your Floor?
Free on-site estimate. Same-day quote. Lifetime warranty included.
Get Free Estimate →